- May 29, 2019 at 17:22 #32064ardvarkParticipant
I am using the Torklift Lock and Load as model for the generator mount I am fabbing to go on our front bumper. I know some of you have your genny leading the way.
How often do you take it off the truck and leave it with the camper. We will be taking our camper off quite a bit in the coming months and are trying to decide whether the genny should stay chained to one leg of the camper or stay with the truck. It seems there would be advantages both ways.
Steve and Andra
2012 F350 6.2 gasser SRW LB
Fab Fours front and rear in case we run into a rhino
2019 Northstar Laredo SC
- June 12, 2019 at 22:06 #32580Jefe4x4Moderator
When we take the genny, which is seldom, I always keep it in the back seat of the truck when not in use. We never remove the camper while on a trip but if we did I would use a bicycle cable lock to keep it on site.
2020 Ford F-350 XLT FX4 4WD SRW SB SC 7.3L Godzilla Gas TorqShift 10R140 397 amps dual Alt dual batts Frnt Dana 60; Rr Dana M275 E-locker 4.30's 4580/4320/4066# payload 7243# curb wt. 11,300# GVWR 5-er prepped. 2020 Northstar Laredo SC, 12v compressor fridge, cassette, 320w Solar sub zero insulation.
- June 13, 2019 at 02:42 #32583Mello MikeKeymaster
We rarely bring the genny with us, but when we do we leave it connected to the Torklift Lock and Load.
- You must be logged in to reply to this topic.