Home Forums Truck Camper Adventure Forum About inverter installs Reply To: About inverter installs


Hi Tom, Theres no requirement to have a on off switch at the inverter positive cable but a fuse is required to protect the cables from amperage overload (usually a 300a ‘t’ type)…

As to wiring the two mentioned circuits at the ATS output, it’s not clear to me how you’d do this (per your plan) without also energizing the main panel…This scenario would cause a ‘round robin’ effect with the converter charger attempting to charge the battery while the inverter is simultaneously being supplied by the battery… Another way to do this is with a sub panel…